网站地图| 免费获取|
毕业论文网
  • 网站首页|
  • 论文范文|
  • 论文降重|
  • 职称论文发表|
  • 合作期刊|
  • 论文下载|
  • 计算机论文|
  • 外文翻译|
  • 免费论文|
  • 论文资料|
  • 论文开题报告
搜索

当前位置:毕业论文网 -> 论文下载 -> 包装工程论文 -> 可再生包装纸脱墨加工工艺研究
机械模具数控资料设计| 土木工程论文范文| 化学工程与工艺论文| 采矿专业设计| 工业工程论文| 热能与动力工程| 材料科学工程| 轻化工程| 焊工钳工技师论文| 给水排水工程|
食品科学生物技术论文| 服装设计论文资料| 理工科资料设计论文| 包装工程论文| 印刷工程论文| 化工与材料论文| 生物工程论文| 制药工程| 机械模具免费论文| 交通工程论文|

可再生包装纸脱墨加工工艺研究

本文ID:LW15379 字数:16307.页数:36 价格:¥128.00 → 信用说明

以下为论文简介,扫一扫付款马上可获取全文,付款金额见标题右下角。付款后请把付款结果截图及本篇论文的网址或者论文ID发给客服,客服核实后,马上将论文发到您的邮箱或者在线传送给您。客服QQ:17304545 点击这里给我发消息   微信:17304545 扫一扫 扫一扫
本站会员可自行下载:下载地址 可再生包装纸脱墨加工工艺研究 (收费:12800 积分)  如何获取积分?
可再生包装纸脱墨加工工艺研究

文档编号:BZ036  文档字数:16307.页数:36

摘     要

 纸包装工业持续快速发展,再生纸作为绿色节能环保材料,正成为纸包装的重要组成部分,如何改良再生纸加工工艺以提高再生纸性能,是本课题研究方向。
 本实验研究采用杭州格林费尔生化技术有限公司研制的生物酶脱墨剂,对国内废报纸(ONP)以及混合办公废纸(MOW)进行脱墨实验,以浮选白度为评价指标,研究了不同的脱墨剂用量、碎浆温度、浆料的保温时间以及浮选的时间对脱墨效果的影响,从而确定脱墨剂最佳的脱墨工艺条件。
 本研究采用杭州格林费尔生化技术有限公司生产的生物酶脱墨剂进行研究,研究的结果表明:
 1.利用格林费尔公司生产的生物酶脱墨剂可以对用于包装纸生产的废旧新闻纸和废纸产生良好的脱墨效果。
 2.在实验条件下,最佳脱墨剂用量为0.3%(对绝干浆);脱墨时,生物酶脱墨时适宜的白水温度为60度;最佳化学药品添加量(对绝干浆)为:NaOH 0.8%;Na2SiO3 1.2%;EDTA 0.2%;H2O2 2.0%(需加化学添加剂的情况下)。
 3.在实验条件下,最佳碎浆工艺为:装缸量180克(绝干浆),温度为60度,浓度为12%,碎浆时间为:15分钟(E1688对国内ONP脱墨)、20分钟(E1688对国内ONP(80%)和37#美废OMG(20%)脱墨)或50分钟(E1696对37#美废OMG脱墨);碎浆后保温时间为30分钟,温度为60度,浆浓为5%。
 4.在实验条件下,最佳浮选温度为60度,浆浓为1%,时间为4分钟或6分钟(E1696对37#美废OMG脱墨),进气量为10L/min。


关键词:生物酶  脱墨  包装

ABSTRACT
 
Paper packaging industry moves on rapidly, and recycled paper as a kind of green and environmental friendly material is becoming an important part of paper packaging. How to improve recycled paper’s processing technology to enhance the performance of recycled paper is the direction of this study.
In this experiment research ,we used the biological agent deinking made by Hangzhou Greenphile bioindustrial solution Co., Ltd. and did deinking experiment on domestic waste newspapers (ONP) and mixed office paper (MOW). We take flotation white as an indicator,deinking on a different dosage, pulper temperature, the size of the holding time and the time of the flotation,to determine the best conditions for the deinking technology.
During this study, We used the enzyme deinking agent provided by Hangzhou Greenphile Bioindustrial solution Co., Ltd. The results show as followings:
 1. The enzyme produced by Hangzhou Greenphile bioindustrial solution Co., Ltd. shows an excellent deinking effect on waste paper and newspaper used for package.
 2. Under the experiment condition,the best dosage of enzyme is 0.3 percent( oven dry pulp), appropriate temperature of fresh water is 60℃, the best dosage of chemical( oven dry pulp)is NaOH 0.8 percent and Na2SiO3 1.2 percent, EDTA 0.2 percent, H2O2 2.0 percent.
 3.  Under the experiment condition,the best condition of pulpifying is with tanks of 180 grams (dry pulp), temperature of 60℃, concentration of 12 percent, pulpifying time of 15 minutes(E1688 deinking for domestic ONP) or 50 minutes(E1696 deinking for 37#OMG).The holding time is 30 minutes, the temperature is 60℃ , pulp concentration of 5% after the pulpifying.
  4.Under the experiment condition,the optimal flotation temperature will be 60 ℃, and pulp concentration of 1 percent, time of  4 minutes or 6 minutes(E1696 deinking for 37#OMG) and air entering speed of  10 L / min.
 
 
Key words:   Biological Enzyme    Deinking  Packaging
 
目  录
中文摘要  1
ABSTRACT  2
目录  4
第一章 绪论 1
第一节 研究的目的和意义 1
一、废纸再生的重要性 1
二、生物酶对包装工艺的改良 2
第二节 研究现状与前景 3
一、废纸回收再生利用现状及其发展趋势 3
二、废纸脱墨技术的研究现状与进展 4
第三节 本次实验研究的重要性 5
第四节 研究理论依据 6
一、废纸脱墨原理 6
二、酶脱墨法 7
第五节 拟研究和解决的问题 8
第二章 实验研究 9
第一节 材料和设备 9
一、材料 9
二、设备 9
第二节 实验室试验流程 10
第三节 方法 11
一、废纸准备 11
二、化学品需求和溶液准备 11
三、白水准备 12
第三章 实验结果与讨论 15
第一节 生物酶脱墨剂脱墨工艺条件的研究 15
 第二节 实验结果 26
 第三节 结果分析 27
第四章 结论 29
参考文献 30
致谢 32

可再生包装纸脱墨加工工艺研究由毕业论文网(www.huoyuandh.com)会员上传。
原创论文资料流程 相关论文
上一篇:笔记本电脑的缓冲包装设计 下一篇:聚酯瓶包装啤酒装备的初步设计
推荐论文 本专业最新论文
Tags:再生 包装纸 加工 工艺 研究 2011-03-26 14:23:22【返回顶部】
发表论文

联系方式 | 论文说明 | 网站地图 | 免费获取 | 钻石会员 | 硕士论文资料


毕业论文网提供论文范文,论文代发,原创论文资料

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2020 毕业论文网 版权所有