网站地图| 免费获取|
毕业论文网
  • 网站首页|
  • 论文范文|
  • 论文降重|
  • 职称论文发表|
  • 合作期刊|
  • 论文下载|
  • 计算机论文|
  • 外文翻译|
  • 免费论文|
  • 论文资料|
  • 论文开题报告
搜索

当前位置:毕业论文网 -> 论文范文 -> 其他专业论文 -> 材料科学与工程 -> 甘氨酸亚铁的合成工艺研究
机械模具数控资料设计| 土木工程论文范文| 化学工程与工艺论文| 采矿专业设计| 工业工程论文| 热能与动力工程| 材料科学工程| 轻化工程| 焊工钳工技师论文| 给水排水工程|
食品科学生物技术论文| 服装设计论文资料| 理工科资料设计论文| 包装工程论文| 印刷工程论文| 化工与材料论文| 生物工程论文| 制药工程| 机械模具免费论文| 交通工程论文|

甘氨酸亚铁的合成工艺研究

本文ID:LW17342 字数:11125,页数:27 价格:¥128.00 → 信用说明

扫一扫 扫一扫
甘氨酸亚铁的合成工艺研究

文档编号:CL042  文档字数:11125,页数:27

摘 要:本文以氯化亚铁和甘氨酸为原料,研究了甘氨酸螯合铁的合成工艺条件。结果表明,pH值、配位比以及抗氧化剂用量对产品组成和得率有很大影响。确定了螯合的最适条件为:pH 值为5,配位比为2:1。采用有机溶剂萃取法,使甘氨酸螯合铁在无水乙醇中以沉淀的方式析出,实现甘氨酸螯合铁与无机铁的分离。讨论了萃取时有机溶剂用量对产品得率的影响,在无水乙醇与滤液的体积比为8:l时,亚铁得率最高。并用红外和DSC对产物进行分析表征。
 
关键词:甘氨酸;氯化亚铁;甘氨酸亚铁;

Abstract: The synthesizing conditions of ferrous glycinate chelate using ferrous chloride and glycine as raw materials were studied in this paper.The result showed that the constitution of the product and the recovery of ferrous were considerably affected by p H ,the molar ratio of glycine to ferrous, and the amount of antioxidant.The optimal reaction condition was pH 5.0,the molar ratio of 2:1.The filtrate was treated with organic solvent and the ferrous glycinate chelate was precipitated in ethyl alcohol absolute.Consequently,the chelate can be purified and analyzed by common chemical method. Extraction solvent was also evaluated. The effect of volume ratio of organic solvent to filtrate on the recovery of ferrous was studied. The highest recovery rate of ferrous was obtained at 8:1l of ethyl alcohol absolute to filtrate of ferrous glycinate. The product was characterized by IR and DSC.

Keywords:Glycine;ferrous chloride;ferrous glycinate


目  录

中文摘要 I
英文摘要 II
目录 III
1.绪论 1
   1.1甘氨酸螯合物的概述 1
       1.1.1 甘氨酸螯合物的定义及性质 1
       1.1.2 氨基酸螯合物的作用 2
   1.2甘氨酸螯合铁的概述 2
       1.2.1 铁的作用 2
       1.2.2 甘氨酸的作用 3
   1.3 甘氨酸亚铁的研究进展 3
       1.3.1甘氨酸螯合铁的发展及优势 3
       1.3.2 甘氨酸亚铁的合成 4
 1.4 立题目的和意义 6
2.实验部分 8
   2.1 实验试剂与仪器设备 8
       2.1.1 实验试剂 8
       2.1.2 仪器设备 8
    2.2 实验方法 9
       2.2.1 合成方案 9
       2.2.2 检测方法 9
3.结果与讨论 13
 3.1 铁源及萃取剂的选择 13
 3.2有机溶剂用量的选择 13
  3.3 PH值对反应的影响 14
 3.4抗氧化剂用量的选择 15
  3.5 配位比的影响 15
  3.6 红外谱图分析 16
  3.7 DSC分析 18
4.总结与展望 20
致谢 21
参考文献 22

甘氨酸亚铁的合成工艺研究由毕业论文网(www.huoyuandh.com)会员上传。
原创论文资料流程 相关论文
上一篇:不同器件面积DSSC制备及性能研究 下一篇:聚对苯二甲酸乙二醇酯的降解研究
推荐论文 本专业最新论文
Tags:甘氨酸 合成 工艺 研究 2011-04-03 09:28:03【返回顶部】
发表论文

联系方式 | 论文说明 | 网站地图 | 免费获取 | 钻石会员 | 硕士论文资料


毕业论文网提供论文范文,论文代发,原创论文资料

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2020 毕业论文网 版权所有