基于西门子PLC的上卸钢装置控制设计

基于西门子PLC的上卸钢装置控制设计

文档编号:DQ339 文档字数:17599,页数:34

摘要
钢铁行业是国家的基础产业和国民经济的支柱产业，现代社会中钢铁又是重要的消耗品，节约劳动力，提高棒材生产线的自动化程度是一个重要的课题。可编程序控制器在提高工业自动化水平及生产效率具有重要的意义，也是现在轧钢棒材生产线中实现自动化的重要手段。成品区的上卸钢装置是棒材成品收集中的关键，是冷床的咽喉部位。本文就是针对老式的上卸钢装置根本不能满足现代轧机速度，从而提出了西门子PLC对上卸钢装置的控制，提高上卸钢装置工作的速度，装置的准确定位，从而提高生产效率和增加效益。本课题主要通过可编程控制器对轧机速度、接近开关等数据和信号的处理，输出正确的动作命令，使裙板式上卸钢装置能够快速、精确的把棒材卸入冷床主体，能够实现上卸钢装置快速的定位。

关键词：棒材生产线可编程控制器上卸钢装置

Abstract
Iron and steel industry is the country's basic industries and pillar industries of the national economy, iron and steel is an important consumables in the Modern society, save labor, raising the bars production line degree of automation is an important issue. PLC in raising the level of industrial automation and production efficiency is of great significance, rolling and bars production line in an important means of automation. District finished bar steel up-charging device products is the key of the collection, it is cooling bed throat site. This article is for old-fashioned bar steel up-charging device can not meet the speed of the modern mill, Siemens PLC by the bar steel up-charging device on the control device, PLC increased speed of bar steel up-charging device, precise positioning of the device, improve productivity and increase efficiency, The topics mainly through PLC process mill rate, closed switches’ signal and data, etc. Output order the correct order of action, skirt of bar steel up-charging device can be fast, accurate to bar dumping into the main cooling bed. bar steel up-charging device rapid positioning devices.
Keywords：PLC Bar production lines bar steel up-charging device

目录
摘要……………………………………………………………………………. . .……………..1
1 前言…………………………………………………………………………………………..4
2 概述……………………………………………………………………………. . ………….6
2.1 可编程控制器的原理……………………………………………………………….…7
2.2 PLC的发展…………………………………………………………………….... ….8
2.3 PLC在工业自动化中的地位………………………………………………………..9
2.4 PLC 在轧钢自动化上的应用…………………………………………………. . .….10
3 裙板式上卸钢装置…………………………………………………………..................12
3.1 裙板式上卸钢装置………………………………………………………………….14
3.2 基本工作原理……………………………………………………………………….14
3.3 相关设备……………………………………………………………………………15
  3.3.1 末架轧机…………………………………………………………………….15
  3.3.2 倍尺飞剪…………………………………………………………………….15
  3.3.3 输入辊道…………………………………………………………………….15
  3.3.4 制动板.………………………………………………………………………17
4 裙板式上卸钢装置的原理………………………………………………………….. .19
4.1 设备选型………………………………………………………………………… …21
  4.1.1 西门子PLC…………………………………………………………..............22
  4.1.2 液压电磁控制阀及控制阀台………………………………………………...22
  4.1.3   热金属探测器.………………………………………………………………23
  4.1.4   电容式接近开关.……………………………………………………………25
  4.1.5   中间继电器.………………………………………………………………….26
4.2 可编程控制器控制原理………………………………………………………………27
7 总结………………………………………………………………………………………….32
致谢…………………………………………………………………………………………........33

基于西门子PLC的上卸钢装置控制设计由毕业论文网（www.huoyuandh.com）会员上传。