基于HydroCOM的石油加氢控制系统设计与实现

文档编号:JD1134  文档字数:17903,页数:21
基于HydroCOM的石油加氢控制系统设计与实现
自动化专业学生   
指导教师   
摘要：在石油生产制造过程中，加氢精制是一个重要的步骤。然而传统的往复式压缩机气量调节方式浪费能源，控制速度缓慢。现采用HydroCOM控制技术实现气量的无级调节，压缩机根据实际需要的气量进行压缩，从而能够最大限度的节约能源，实现了传统的常规控制无法达到的控制功能。本文详细阐述了HydroCOM控制系统的基本工作原理及组成结构，嵌入在CS3000控制系统中，最终实现对气量的无级控制。采用HydroCOM系统后，节能效果显著，能够有效地实现节能降耗、减亏增效的目的。结合其在实际应用中展现的良好的节能效果，证明HydroCOM是一种值得广泛推广的先进技术。
关键词：HydroCOM系统；集散控制系统；压缩机

 The Design and Implementation of Oil Hydrogenation
  Control System Based on HydroCOM
Student majoring in automation   
 Tutor    
Abstract： In the petroleum production process, hydrogenation is a very important step. However, the traditional way of regulating the reciprocating compressor wastes energy and has slow control rate. HydroCOM control technology now is used to realize the stepless regulation of the gas compressor according to the actual needs of hydrogen, achieving the maximum energy saving while the traditional control methods could not reach the same control function. The basic working principles and structure of the HydroCOM system are described in this paper. This system is embedded in the CS3000 control system and ultimately accomplishes the stepless control of hydrogen. Using HydroCOM system, the energy-saving effect is remarkable. It is also effectively achieve the purpose of reducing loses and improving efficiency. Combined with its outstanding practical application results in the field of energy-saving, HydroCOM system is an advanced technology which should be widely introduced.
Key words: HydroCOM System; Distributed Control System; Compression Engine

目  录
摘要………………………………………………………………………………………1
关键词…………………………………………………………………………………………1
Abstract………………………………………………………………………………………1
Key words……………………………………………………………………………………1
引言……………………………………………………………………………………………1
1 CS3000组态软件…………………………………………………………………………3
1.1组态软件概述……………………………………………………………………………3
1.2 DCS概述…………………………………………………………………………………3
1.3 DCS基本构架……………………………………………………………………………4
1.4 Centum软件概述…………………………………………………………………………4
2 HydroCOM系统应用背景…………………………………………………………………5
2.1往复式压缩机内部原理…………………………………………………………………5
2.2 往复式压缩机气量调节方法……………………………………………………………5
2.3 传统状况分析……………………………………………………………………………5
2.4 HydroCOM系统基本原理…………………………………………………………………6
2.5 HydroCOM工作原理………………………………………………………………………6
2.6 HydroCOM节能原理………………………………………………………………………6

3 HydroCOM系统硬件组成……………………………………………………………7
3.1中间接口单元CIU………………………………………………………………………8
3.2 液压执行机构HA…………………………………………………………………………8
3.3 液压执行油站HU…………………………………………………………………………8
3.4 上传死感点TDC…………………………………………………………………………8
4 工艺控制方案…………………………………………………………………………8
4.1 HydroCOM系统控制目标…………………………………………………………………8
4.2 原有控制方案………………………………………………………………………9
4.3 增加HydroCOM系统后控制方案………………………………………………………10
5 CS3000组态实现…………………………………………………………………10
5.1 系统构成………………………………………………………………………………10
5.2 监控画面………………………………………………………………………………11
5.3 CS3000系统配置………………………………………………………………………11
5.4 CS3000软件组态步骤…………………………………………………………………11
5.5 HydroCOM仪表逻辑功能………………………………………………………………13
5.6 HydroCOM系统控制信号线性化………………………………………………………14
6 实验方法与步骤…………………………………………………………………………15
6.1 实验实物图及连接……………………………………………………………………15
6.2 压缩机的启动…………………………………………………………………………16
6.3 控制器负荷程序………………………………………………………………………17
7 结论………………………………………………………………………………………18
致谢…………………………………………………………………………………………19
参考文献……………………………………………………………………………………19

相关论文