网站地图| 免费获取|
毕业论文网
  • 网站首页|
  • 论文范文|
  • 论文降重|
  • 职称论文发表|
  • 合作期刊|
  • 论文下载|
  • 计算机论文|
  • 外文翻译|
  • 免费论文|
  • 论文资料|
  • 论文开题报告
搜索

当前位置:毕业论文网 -> 论文下载 -> 电子信息工程 -> 基于微控制器的坡度测量仪的设计
自动化论文范文| 电子机电论文| 测控技术论文| 通信专业论文| 电气工程论文| 通信工程论文| 电子信息工程论文| 免费自动化论文| 免费电子论文| 免费电气论文| 免费通信论文

基于微控制器的坡度测量仪的设计

本文ID:LW16483 字数:11380,页数:42 价格:¥118.00 → 信用说明

扫一扫 扫一扫
本站会员可自行下载:下载地址 基于微控制器的坡度测量仪的设计 (收费:11800 积分)  如何获取积分?
基于微控制器的坡度测量仪的设计

文档编号:DZXX162  文档字数:11380,页数:42

摘要
 单片机(Micro Controller Unit 简称MCU)系统在现代社会的检测和控制系统中得到了较为广泛的应用,坡度是系统经常测量的量,但坡度常常是一个模拟量,而模拟量是比较难被测量出来的,因此,需要采用适当的技术将模拟的测量量转化为数字测量量。在原理上虽然不是非常困难但实现起来,还是会遇到其它各种方面的问题。因此对单片机坡度测量系统的研究有着非常重要的目的和意义。本文主要论述了基于单片机的智能坡度测量仪的设计。利用单片机对坡度等参数进行测量,可以充分利用单片机的运算和控制功能,方便地实现测量,使测量精度得到提高。同时用软件程序代替一些硬件测量电路,可在硬件结构不变的情况下,修改软件以增加新的功能。能够很好的完成对坡度参数的测量,以满足现代测控系统的需要。
 
关键词:单片机,坡度测量电路,数字显示电路
 ABSTRACT
 MCU (Micro Controller Unit) system in a modern society in the detection and control system has been more widely used, the slope system is often measured by quantity , but the slope is often an analog and analog is more difficult to be measured.therefore, requiring the use of appropriate technology  simulate the measurement into a digital measurement. Although in theory it is not very difficult to achieve, I will continue to face various other aspects.  So the slope of MCU Measurement System Research has a very important purpose and significance.
 It is mainly discussed in this paper that the design of the MCU-based Intelligent slope measuring instrument. I measure the slope and other parameters measured by the MCU,and I can take full advantage of MCU processing and control functions, to facilitate the realization of measurements for improving measurement accuracy. Simultaneously using the software procedure replaces some hardware metering circuits, and with the hardware architecture invariable situation, I can revise the software to increase the new function.  the slope parameter is well measured to achive the need in the modern observation and control system.


Key words: MCU, slope measuring circuit, figures show circuit.

目录
摘要 Ⅰ
ABSTRACT Ⅱ
第一章 引言 1
 1.1 本课题的研究意义 1
 1.2 本课题的发展状况 2
 1.3 本课题的设计目标 3
第二章 PROTEL的使用 4
第三章 电解传感器原理与总体方案设计 6
 3.1   电解传感器 6
 3.1.1 工作原理 6
 3.1.2 产品特点 6
 3.2   总体设计方案 7
 3.2.1 传感器的选择 7
 3.2.2 显示电路的选择 7
 3.2.3 系统结构框图 8
 3.2.4 系统工作原理 9
 3.2.5 系统设计的关键问题 9
第四章 坡度测量仪硬件实现 10
 4.1  测量电路 10
 4.2  数字显示电路 11
第五章 坡度测量的单片机实现 14
 5.1 STC89C52单片机的概述 14
 5.2程序 18
 5.2.1 max147的A/D转化程序流程图 18
 5.2.2 max147的A/D转化程序 19
 5.2.3显示程序流程图 22
 5.2.4显示程序及其代码 23
 5.3程序调试 25
第六章 坡度测量仪总结 27
致谢 28
参考文献 29
附录一 实物图片 30
附录二 源程序 32
附录三 元件清单 26

基于微控制器的坡度测量仪的设计由毕业论文网(www.huoyuandh.com)会员上传。
原创论文资料流程 相关论文
上一篇:基于MCGS的液温监控系统设计与实现 下一篇:基于单片机的数控稳压电源的设计..
推荐论文 本专业最新论文
Tags:基于 控制器 坡度 测量仪 设计 2011-03-31 14:25:07【返回顶部】
发表论文

联系方式 | 论文说明 | 网站地图 | 免费获取 | 钻石会员 | 硕士论文资料


毕业论文网提供论文范文,论文代发,原创论文资料

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2020 毕业论文网 版权所有