网站地图| 免费获取|
毕业论文网
  • 网站首页|
  • 论文范文|
  • 论文降重|
  • 职称论文发表|
  • 合作期刊|
  • 论文下载|
  • 计算机论文|
  • 外文翻译|
  • 免费论文|
  • 论文资料|
  • 论文开题报告
搜索

当前位置:毕业论文网 -> 论文范文 -> 化学工程与工艺 -> 针对高酸原油选择适合的破乳剂
机械模具数控资料设计| 土木工程论文范文| 化学工程与工艺论文| 采矿专业设计| 工业工程论文| 热能与动力工程| 材料科学工程| 轻化工程| 焊工钳工技师论文| 给水排水工程|
食品科学生物技术论文| 服装设计论文资料| 理工科资料设计论文| 包装工程论文| 印刷工程论文| 化工与材料论文| 生物工程论文| 制药工程| 机械模具免费论文| 交通工程论文|

针对高酸原油选择适合的破乳剂

本文ID:LW18946 字数:19936,页数:44 价格:¥128.00 → 信用说明

扫一扫 扫一扫
针对高酸原油选择适合的破乳剂

文档编号:HG223  文档字数:19936,页数:44

摘  要


 随着社会的发展,各国对石油的需求量与日俱增。而原油生产在油田基本进入三次采油期。随着油田大量注水开发,油井产出液的含水量大量增加。现有破乳剂均有一定的局限性,对于特高含水的水包油型乳状液,存在脱水率低、脱水温度高、脱水速度慢等缺点。因此,针对不同地区的不同原油选择适合的破乳剂有着重要的作用。
 破乳剂筛选实验评价表明,在实验温度80℃和用量0.1ml(20ppm)质量浓度为1%的破乳剂下,瓶试法筛选出适合高酸原油性能优良的破乳剂5#、6#、7#和8#。
 考察不同条件对破乳作用影响时,选用筛选出的4种破乳剂,在温度90℃下,随着破乳剂用量的增大,原油脱水量也随着增加,破乳剂用量为15ppm~20ppm时,原油脱水达到最大然后趋于平稳。在选定用量为20ppm破乳剂下,随着温度的升高,原油脱水量也随之增加,在80~90℃时,原油脱水量达到最大且趋于平稳,所以破乳剂的最佳作用温度为80~90℃。在相同条件下,相对于另外的3种破乳剂,6#的效果最优。
 由于为了提高原油采收率,在三次采油中加入石油磺酸盐表面活性剂,以增加油、水乳化作用,因此原油采出液普遍含有石油磺酸盐。考察了影响破乳剂性能的各种反应条件,在实验温度90℃和用量为10ppm破乳剂的条件下,通过瓶试脱水法,考察评价石油磺酸盐对破乳剂的影响。研究表明,石油磺酸盐明显的降低了破乳剂在高酸原油中破乳脱水作用。
关键词; 破乳剂,石油磺酸盐,原油脱水,三次采油

abstract
 With the development of society, the growing demand for petroleum, Crude oil production in oilfield and basic in the mid-late period. With the development of water injection wells, the oil content of large increase output. Existing demulsifier has certain limitation, for determining the type oil-in-water emulsions, dehydration rate is low, high dehydration temperature, slow dehydration speed,kind of shortcomings .Therefore, in different regions of the different oil to select a suitable demulsifier plays an important role.
 Experiments of demulsifier screening showed that, In experimental temperature 80 degrees and dosage of demulsifier 20ppm quality concentrations, Select the suitable for highly sour crude for good performance of demulsifier is NO.5 ,NO.6, NO.7and NO.8.
 When different conditions for their effects, selection of 4 kinds of demulsifier, in 90 degrees Celsius temperature, with the increase of demulsifiers dosage, crude oil, water off with the dosage of demulsifier 15ppm - 20ppm, oil dehydration and stabilize maximum. The selected for 20ppm demulsifier dosage, with the rise of temperature, the oil off water also increases. In 80-90 ° c, the oil off water and stabilize maximum, so the best role demulsifier for 80-90 degrees Celsius temperature. Under the same conditions, relative to the other three kinds of demulsifier, NO.6 is the best.
 Due to enhance oil recovery in eor, adding petroleum sulfonates surfactants, to increase the water and oil emulsification, so crude oil recovery liquid containing oil sulfonates generally. The influence of reaction of demulsifiers performance in experimental conditions, 90 degrees Celsius temperature for 10ppm demulsifier and dosage, under the condition of investigation of petroleum sulfonates evaluation of demulsifier. Research shows that petroleum sulfonates significantly reduced in highly sour crude demulsifier during their dehydration effect.
Key worlds; demulsifier , petroleum sulfonates, crude oil dehydration, eor

目  录
1综述 1
1.1原油组成及破乳剂的作用 1
1.2 原油乳状液的稳定性 3
1.2.1 原油乳状液的形成 3
1.2.2原油乳状液的稳定性影响因素 5
1.2.3 水存在的形式 8
1.3 破乳剂的作用机理及破乳方法 9
1.3.1 原油破乳剂的作用机理 9
1.3.2破坏乳状液的方法 10
1.3.3乳状液的破乳机理 12
1.4原油破乳剂的发展 12
1.4.1国外破乳剂的发展 13
1.4.2国内破乳剂的发展 14
1.5本实验的意义 21
2实验部分 23
2.1 实验仪器 23
2.2 实验药品 23
2.3 实验方法 24
2.3.1 破乳剂的配制 24
2.3.2 实验过程 24
2.3.3 25
2.4 实验的影响因素 26
2.4.1温度对原油脱水效率的影响 26
2.4.2破乳剂用量对原油脱水效率的影响 29
2.4.3 磺酸盐对原油脱水速率的影响 31
3 结论 33
参考文献 34
致    谢 37

针对高酸原油选择适合的破乳剂由毕业论文网(www.huoyuandh.com)会员上传。
原创论文资料流程 相关论文
上一篇:探究造成液化石油气铜片腐蚀 下一篇:氢溴酸法合成 1-溴代正辛烷
推荐论文 本专业最新论文
Tags:针对 高酸 原油 选择 适合 乳剂 2011-04-13 19:40:41【返回顶部】
发表论文

联系方式 | 论文说明 | 网站地图 | 免费获取 | 钻石会员 | 硕士论文资料


毕业论文网提供论文范文,论文代发,原创论文资料

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2020 毕业论文网 版权所有