MG400920-WD采煤机摇臂设计

文档编号:JX362  所有图纸,任务书.外文翻译。文档字数:29889.页数:85

摘   要

     MG400/920-WD型采煤机是一种电牵引大功率采煤机，该机机身矮，装机功率大，所有电机横向布置，机械传动都是直齿传动，电机、行走箱驱动轮组件等均可从老塘侧抽出，故传动效率高，容易安装和维护。
 本说明书主要介绍了采煤机截割部的设计计算。MG400/920-WD 型采煤机截割部主要是由四级齿轮传动组成，截割部电机放在摇臂内横向布置，电动机输出的动力经由三级直齿圆柱齿轮和一级行星轮系的传动，最后驱动滚筒旋转。截割部采用四行星单浮动结构，减小了结构尺寸，采用大角度弯摇臂设计，加大了过煤空间，提高了装煤效果。
 在设计过程中，对截割部的轴、传动齿轮、轴承和联接用的花键等部件进行了设计计算、强度校核和选用。本说明书主要针对主要部件的设计计算和强度校核进行了叙述和介绍。
 此外，还对MG400/920-WD采煤机的使用与维护进行了说明，以便能更好的发挥该采煤机的性能，达到最佳工作效果。
关键词：采煤机；截割部；行星轮系；齿轮传动设计

ABSTRACT

    The MG400/920-WD type mining machine is that a kind of electricity draws the high-power mining machine, this machine fuselage is low, Installation is large in power, all electrical machineries are fixed up horizontally, mechanical drive is all the transmission of straight tooth, electrical machinery, walk case drive wheel package etc. can take from old pool side out, so the transmission is high in efficiency, easy to install and safeguard.
 Calculate in design which cuts the cutting department of main introduction mining machine of this manual. It is made up of a moderate breeze gear wheel transmission that the MG400/920-WD type mining machine cuts the cutting department, cut the electrical machinery of cutting department and put to fix up horizontally in the rocker arm, the power that the motor outputs leans on a round of transmission of department of gear wheel and planet round via the tertiary straight tooth, urge the cylinder to rotate finally. Cut the cutting department and adopt the floating structure of four planetary forms, have reduced the physical dimension, adopt the large angle to curve the rocker arm to design, have strengthened the space of coal, have improved the coal result of putting.
 In the course of designing, to cutting the axle of the cutting department, gear wheel of the transmission, parts such as the bearing and spline linking using, etc have designed to calculate, the intensity is checked and selected for use. This manual mainly designs for main part one calculating to check with the intensity have narrated and introduced.
 In addition，returning use for MG400/920-WD mining machine and maintenance proves, In order to be able to good full play performance of person who should mine, reach the best working result.
 Keyword: Mining machine ；the cutting department ； A department of planet ；Gear wheel of the transmission Design

目    录

摘 要 ……………………………………………………………………………I
Abstract ………………………………………………………………………II
第一章 绪论……………………………………………………………………1
1.1项目研究意义……………………………………………………………1
1.2国内电牵引采煤机的技术特点及发展趋势……………………………5
1.3总体方案确定 ……………………………………………………………6
1.4截割部结构的技术特征…………………………………………………… 8
第二章 截割部减速部分的设计与计算………………………………………13
2.1 各级传动转速、功率、转矩………………………………………………13
2.2截割部齿轮设计计算………………………………………………………16
2.3截割部行星机构的设计计算………………………………………………30
第三章轴的设计及校核………………………………………………………40
3.1 Ⅲ轴的设计与校核…………………………………………………………40
3.2行星齿轮轴的设计与校核…………………………………………………45
第四章 轴承和键的设计计算和校核…………………………………………47
4.1对截Ⅲ轴的轴承2219c和Nj322进行寿命计算…………………………47
4.2花键联接强度校核…………………………………………………………49
第五章 滚筒截齿的配置………………………………………………………50
5.1滚筒的截齿排列配置………………………………………………………51
5.2滚筒宽度……………………………………………………………………55
5.3螺旋叶片参数确定………………………………………………………56
5.3滚筒截齿的选择………………………………………………………58
第六章 弹性转矩轴的设计及校核……………………………………………59
6.1 弹性转矩轴的性能及作用…………………………………………………59
6.2结构和参数设计与校核…………………………………………………59
第七章 截割部液压系统………………………………………………………64
7.1截割部液压系统……………………………………………………………64
7.2液压系统的安装及故障……………………………………………………66
7.3截割部的润滑及密封………………………………………………………68
参考文献………………………………………………………………………70
翻译部分
英文原文……………………………………………………………………71
中文译文……………………………………………………………………77
致谢……………………………………………………………………………83

相关论文