网站地图| 免费获取|
毕业论文网
  • 网站首页|
  • 论文范文|
  • 论文降重|
  • 职称论文发表|
  • 合作期刊|
  • 论文下载|
  • 计算机论文|
  • 外文翻译|
  • 免费论文|
  • 论文资料|
  • 论文开题报告
搜索

当前位置:毕业论文网 -> 论文下载 -> 制药工程论文 -> 壳聚糖-羧甲基纤维素温敏凝胶的研制及其性能研究
机械模具数控资料设计| 土木工程论文范文| 化学工程与工艺论文| 采矿专业设计| 工业工程论文| 热能与动力工程| 材料科学工程| 轻化工程| 焊工钳工技师论文| 给水排水工程|
食品科学生物技术论文| 服装设计论文资料| 理工科资料设计论文| 包装工程论文| 印刷工程论文| 化工与材料论文| 生物工程论文| 制药工程| 机械模具免费论文| 交通工程论文|

壳聚糖-羧甲基纤维素温敏凝胶的研制及其性能研究

本文ID:LW16220 字数:11342,页数:27 价格:¥128.00 → 信用说明

以下为论文简介,扫一扫付款马上可获取全文,付款金额见标题右下角。付款后请把付款结果截图及本篇论文的网址或者论文ID发给客服,客服核实后,马上将论文发到您的邮箱或者在线传送给您。客服QQ:17304545 点击这里给我发消息   微信:17304545 扫一扫 扫一扫
本站会员可自行下载:下载地址 壳聚糖-羧甲基纤维素温敏凝胶的研制及其性能研究 (收费:12800 积分)  如何获取积分?
壳聚糖-羧甲基纤维素温敏凝胶的研制及其性能研究

文档编号:ZY066    文档字数:11342,页数:27

摘要:本文档研究制备了能够在生理条件下发生相转化的壳聚糖-羧甲基纤维素凝胶。首先用酸度计法测得羧甲基纤维素钠的取代度、双突越滴定法测得壳聚糖的脱乙酰度,用乌氏粘度计测得羧甲基纤维素钠、壳聚糖的粘均分子量,然后通过物理共混技术制备得到互穿网络的壳聚糖-羧甲基纤维素水凝胶。通过对水凝胶制备条件的考察,优选出具有快速响应性的水凝胶,并对制得的凝胶进行了确证和性能测定,如红外光谱、溶胀度、透光率、相转变温度等。实验结果表明:当壳聚糖溶液pH=4.6,质量分数为1% 羧甲基纤维素钠溶液与等浓度壳聚糖溶液以0.8的体积比混合时,壳聚糖-羧甲基纤维素溶液在 41℃发生凝胶化,凝胶时间为1min。该凝胶在室温或低于室温时可保持液态,当温度达到体温时可快速发生凝胶化,是一种可供医疗使用的智能水凝胶。
 
关键词:壳聚糖;羧甲基纤维素钠;温敏性

Abstract: This thesis is to introduce the preparation of the chitosan-carboxymethyl cellulose (CS-CMC) hydrogel, which can occur the pHase transformation under pHysiological conditions. Firstly, the substitution degree of sodium carboxymethyl cellulose was measured by pH meter titration method, and the deacetylation degree of chitosan was measured by two abrupt titration method. The viscosity average molecular weights of sodium carboxymethyl cellulose and chitosan were determined by ubbelohde viscometer. And then the interpenetrating network hydrogel of chitosan-carboxymethyl cellulose (CS-CMC) was prepared by pHysical blending technology. The fast response hydrogel was obtained after the preparation condition study. Finally the characteristics identification and performance measurement of the obtained gel were carried out, such as infrared spectroscopy, swelling ratio, transmittance, pHase transition temperature, and so on. The results show that when the pH of CS solution reaches 4.6, 1% CMC solution mixed with equal concentrations of CS solution in the volume ratio of 0.8, the solution gelled at 41 ℃, the gel time was less than 1min. This hydrogel can be kept in the liquid at room temperature or below room temperature, while when the temperature reaches body temperature, it can quickly gelled, This hydrogel is smart and can be used in medical treatment.

 Key words:  Chitosan;  Carboxymethyl Cellulose;  thermo-sensitive 

目  录

中文摘要   I
英文摘要   II
目录  
1  绪论    1
 1.1 凝胶   1
 1.2  高分子可降解材料   1
 1.3  研究内容     3
2  实验部分   4
 2.1 实验试剂和仪器    4
 2.1.1 实验试剂   4
 2.1.2 实验仪器   4
 2.2 实验方法   5
 3  结果与讨论   9
 3.1  原料的检测   9
 3.2  CS-CMC温敏凝胶的形成   12
 3.3  凝胶制备条件对凝胶形成的影响    13
 3.4  CS-CMC凝胶的处方优化   15
 3.5  凝胶性能测试   16
4  总结与展望   20
致谢   21
参考文献   22

壳聚糖-羧甲基纤维素温敏凝胶的研制及其性能研究由毕业论文网(www.huoyuandh.com)会员上传。
原创论文资料流程 相关论文
上一篇:5-氨基-3-巯基-1, 2, 4-三唑的合成 下一篇:八角茴香中莽草酸的提取与纯化
推荐论文 本专业最新论文
Tags:聚糖 甲基 纤维素 温敏 凝胶 研制 及其 性能 研究 2011-03-30 21:44:20【返回顶部】
发表论文

联系方式 | 论文说明 | 网站地图 | 免费获取 | 钻石会员 | 硕士论文资料


毕业论文网提供论文范文,论文代发,原创论文资料

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2020 毕业论文网 版权所有