网站地图| 免费获取|
毕业论文网
  • 网站首页|
  • 论文范文|
  • 论文降重|
  • 职称论文发表|
  • 合作期刊|
  • 论文下载|
  • 计算机论文|
  • 外文翻译|
  • 免费论文|
  • 论文资料|
  • 论文开题报告
搜索

当前位置:毕业论文网 -> 论文下载 -> 制药工程论文 -> 比卡鲁胺的质量标准
机械模具数控资料设计| 土木工程论文范文| 化学工程与工艺论文| 采矿专业设计| 工业工程论文| 热能与动力工程| 材料科学工程| 轻化工程| 焊工钳工技师论文| 给水排水工程|
食品科学生物技术论文| 服装设计论文资料| 理工科资料设计论文| 包装工程论文| 印刷工程论文| 化工与材料论文| 生物工程论文| 制药工程| 机械模具免费论文| 交通工程论文|

比卡鲁胺的质量标准

本文ID:LW16179 字数:10729,页数:25 价格:¥128.00 → 信用说明

以下为论文简介,扫一扫付款马上可获取全文,付款金额见标题右下角。付款后请把付款结果截图及本篇论文的网址或者论文ID发给客服,客服核实后,马上将论文发到您的邮箱或者在线传送给您。客服QQ:17304545 点击这里给我发消息   微信:17304545 扫一扫 扫一扫
本站会员可自行下载:下载地址 比卡鲁胺的质量标准 (收费:12800 积分)  如何获取积分?
比卡鲁胺的质量标准

文档编号:ZY025    文档字数:10729,页数:25

摘 要:本文档建立比卡鲁胺的质量标准。通过实验我们确定的含量测定方法如下:Alltima柱子(150×4.6mm,5μ,Alltech),流动相为乙腈-水(47:53),流速是1.0mL/min,检测波长为270nm,进样体积为20μL。此法简便、准确、具专属性和良好的重现性,可用于该药物的质量控制。在有关物质检测项下的破坏性实验中,本品经过酸、碱、氧化、热降解及光照破坏后,产生的杂质峰能与主峰分离,说明该色谱系统能有效分离检测降解产物。在有机溶剂残留量测定项下,利用气相色谱顶空进样法检查乙醇、三氯乙烷、乙醚、二氯甲烷、四氢呋喃、甲苯、氯仿、乙酸乙酯、石油醚、二甲基甲酰胺和二甲基乙酰胺的残留量,DMF为溶剂,进样瓶在80℃下平衡30min,HP-5(0.32mm×30m×0.22μm)毛细管柱,进样口温度200℃,FID检测器温度200℃,柱温50℃。我们依据中国药典各项标准进行分析,最终以药典的形式写出各项目规范。
关键词:比卡鲁胺;质量标准;杂质检查;含量测定

Abstract:In this article we established the quality control standard of Bicalutamide. The methods of content determination which we have adopted were as follows: Alltima column(150×4.6mm,5μ,Alltech),and the mobile phase consisted of a mixture of acetonitrile and water buffer solution (47:53) pumped at a flow rate of 1.0mL/min. The detection wavelength was 270nm. The methods of content determination was simple,specific and accurate. It can be used for the quality control of Bicalutamide. In destroying experiments of related substance measure item, the samples were destroyed by acid, alkali, oxidation, heating and illumination. The related substance can be separated from Bicalutamide, which showed this chromatographic system being effective. In organic residual solvents measure item, we used headspace GC chromatography to examine ethanol, trichloroethane, aether, dichloromethane, tetrahydrofuran, toluene, chloroform, ethyl acetate, petroleun ether, DMF and DMAC residue in Bicalutamide. DMF was used as solution. Sample had been equilibrated at 80℃ for 30min. HP-5(0.32mm×30m×0.22μm)capillary column was used. The temperature of injector, FID and column were 200℃., 200℃.and 50℃ respectively. We have done other experiments according to Chinese Pharmacopoeia. Finally, we have written quality standard of Bicalutamide in Chinese Pharmacopoeia’s formats.
Keywords:Bicalutamide; Quality standard; Test of impurities;Quality control

目录
中文摘要 I
英文摘要 II
目录 III
1. 绪 论 1
 1.1  选题的目的及意义 1
 1.2  选题的背景 1
 1.3  国内外文献综述 1
 1.4  主要研究内容 2
2. 实验部分 3
 2.1  实验仪器与试剂 3
 2.2  实验步骤 3
3. 结果与讨论 8
 3.1  性状结果 8
 3.2  鉴别结果 8
 3.3  检查结果 10
 3.4  含量测定结果 14
4. 总结和展望 17
 4.1  总结 17
 4.2  展望 19
致  谢 20
参考文献 21

比卡鲁胺的质量标准由毕业论文网(www.huoyuandh.com)会员上传。
原创论文资料流程 相关论文
上一篇: 2-硝基间苯二酚合成正交优化 下一篇:车前子多糖抗氧化活性研究
推荐论文 本专业最新论文
Tags:卡鲁胺 质量 标准 2011-03-30 19:54:45【返回顶部】
发表论文

联系方式 | 论文说明 | 网站地图 | 免费获取 | 钻石会员 | 硕士论文资料


毕业论文网提供论文范文,论文代发,原创论文资料

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2020 毕业论文网 版权所有