钻床主轴进给系统的PLC设计

文档编号:ZD630    文档字数:2563,页数:10

摘要
 文章探讨了如何利用三菱PLC FX2N及气动技术对钻床主轴进给系统的设计，在这种方式下的钻床称之为气动钻床。重点分析了系统软硬件设计部分，并给出了系统硬件接线图、PLC 控制I/O 端口分配表以及整体程序流程图等，实现了PLC控制整个系统的运行，降低了工人的劳动强度，节省了劳动力，提高工作效率，减少废品率，机械性能稳定可靠。
 
关键词：PLC  钻床主轴进给系统  气动控制  电磁阀 

Abstract
 How has the article discussed using Mitsubishi PLC FX2N and the air operated technology to the drilling spindle to feed system's design, calls it under this way's drilling machine the air operated drilling machine. The selective analysis system software and hardware design part, and gave the system hardware wiring diagram, PLC to control the I/O port distribution list as well as the overall program flow diagram and so on, realized PLC to control overall system's movement, reduced worker's labor intensity, has saved the labor force, raised the working efficiency, reduced the rejection rate, mechanical property stable reliable.
 
 key word: PLC drilling spindle to feed system pneumatic control solenoid valve
 
 
 
目录
摘要 I
Abstract I
目录 II
引言 1
1概述 1
2 控制方案设计 2
3 硬件设计 3
3.1可编程控制器PLC的选型 3
3.2电磁阀 3
3.3 I/O分配表 4
3.4 电气原理图的设计 5
4 软件设计 5
4.1工作流程图 5
4.2梯形图 6
结论 7
参考文献 8

相关论文